Screen Display 11

Screen Display #11A:

Screen Display #11B:

Screen Display # 11 (A and B). Turn the menu dial to highlight the item to monitor. If the desired item is not shown on Screen Display # 11 A, keep turning the menu dial to get to Screen Display # 11 B. In either screen, 11 A or 11 B, each time you highlight an item, you should press TRIGGER.


An asterisk (*) symbol will appear to the left side of the item selected after pressing TRIGGER.
The number keys on the NGS Scan Tool allow you to select one of the following highlighted options that appear at the bottom of the screen display: CLEAR, ALL, START and SETUP.

CLEAR- Pressing the CLEAR key (number 4) deselects all items (sensors and actuators).
ALL- Pressing the ALL key (number 5) allows you to monitor all items.
START- Pressing the START key (number 6) starts the acquisition of selected items. START key also displays a screen that allows you to run the recorder capture function. If all items are selected, Screen Display # 12 will appear after the START key is pressed.
SETUP - Pressing the SETUP key (number 7) sets up the recorder options.