Electronic Brake Control Module: Service and Repair

Electronic modules are sensitive to static electrical charges. If the module is exposed to these charges, damage may result.
1. Disconnect battery ground cable.
2. Remove storage bin, then remove right and left inner kick panels.
3. Disconnect foot lamp electrical connectors, if equipped.
4. Disconnect ABS control module electrical harness connector. Use a screwdriver to pry back the metal retainer and remove the harness connector.
5. Disconnect surrounding module electrical harness connectors and position harnesses clear of area.
6. Remove three ABS control module screws.
7. Remove ABS control module from vehicle.
8. Reverse procedure to install.