Instrument Panel - Lower Cover and Lower Reinforcement

REMOVAL





1. Remove the plastic rivet, the four instrument panel lower cover screws and the instrument panel lower cover.





2. Remove the two RH instrument panel lower reinforcement nuts.





3. Remove the six RH instrument panel lower reinforcement bolts and the RH instrument panel lower reinforcement.

INSTALLATION
To install, reverse the removal procedure. Tighten the instrument panel lower cover screws to 2.6-3.6 Nm (23-32 lb-in). Tighten the RH instrument panel lower reinforcement nuts to 3.2-4.4 Nm (29-39 lb-in). Tighten the RH instrument panel lower reinforcement bolts to 3.2-4.4 Nm (29-39 lb-in).