Seat Belt Retractor Limit Switch: Testing and Inspection
DOOR LATCH SWITCH1. Key OFF
2. Disconnect the LH and RH door latch switch connectors (inside the front door).
3. Measure the resistance between the two wire terminals at the door latch switch connectors under the conditions shown.
4. If the resistances are correct, return to the Pinpoint Tests. Otherwise, replace the door latch switch (part of the front door latch).
SHOULDER STRAP SWITCH, FRONT
1. Key OFF
2. Disconnect the front shoulder strap switch connector.
3. Measure the resistance between the following wire terminals at the shoulder strap switches under the conditions shown.
4. If the resistances are correct, return to the Pinpoint Tests. Otherwise, replace the front shoulder strap switch (part of the front seat shoulder strap track).
SHOULDER STRAP SWITCH, REAR
1. Key OFF.
2. Disconnect the rear shoulder strap switch connectors.
3. Measure the resistance between the following wire terminals at the shoulder strap switches under the conditions shown.
4. It the resistances are correct, return to the Pinpoint Tests. Otherwise, replace the rear shoulder strap switch (part of the front seat shoulder strap track).