Antenna: Description and Operation

OPERATION
The Power Antenna Module receives voltage via circuit RA35 (BR/W) at all times. Voltage is sent to this Module via circuit RA32 (O), with the Ignition Switch in "ACC" or "RUN" and via circuit RA30 (BL) with the Ignition Switch in "START" or "RUN". When the Radio is turned on, voltage is supplied to the Power Antenna Module from the radio via circuit RA05 (BR). The Module then applies voltage to the Power Antenna Motor to extend the antenna. When the radio is turned off, voltage is removed from circuit RA05. The Module then applies voltage to the Power Antenna Motor in the opposite direction to retract the antenna.