With Scan Tool

New Generation STAR (NGS) Tester

1. Key OFF.
2. Verify that the proper memory (EPROM) card is inserted into the NGS.
3. Connect the on-board diagnostics II (OBD II) data link connector (DLC) cable to the NOS.
4. Connect the NGS OBD II DLC cable securely into the vehicle OBD II DLC.
5. Connect the NGS power supply cable to the vehicle.
6. Key ON or START vehicle if necessary. The NGS is ready to communicate with the vehicle powertrain control module (PCM).
7. Select GENERIC OBD II FUNCTIONS.
8. Select DIAGNOSTIC TROUBLE CODES.
9. To disconnect tool, turn key OFF and disconnect the NGS from the OBD II DLC and power supply.