60 Percent Portion
DISASSEMBLY1. Remove the rear seat.
2. Place the rear seat on a clean workbench.
3. Lock the rear seat into the upright position.
4. Remove the recliner and latch handles.
1. Remove the screws.
2. Remove the recliner and latch handles.
5. Remove the inboard pivot cover.
1. Remove the bolt.
2. Remove the inboard pivot cover.
6. Remove the outboard pivot cover.
7. Remove the inboard safety belt bracket.
NOTE: Make sure that the spacer in between the safety belt bracket and the recliner mechanism is retained for use during assembly.
1. Remove the bolt.
2. Remove the bracket.
8. Remove the inboard seat base pivot bolt.
9. Remove the outboard seat base pivot bolt.
10. Remove the seat base.
ASSEMBLY
1. Assemble in the reverse order.