PC1

PC1 PERFORM ELECTRICAL SYSTEM PRECHECK

- Verify that all the connectors used in the anti-lock brake system are secure and free of contaminants or corrosion.

- Verify that fuse 14 (10A) and fuse 11 (7.5A) in the I/P fuse panel is fully seated and intact.

- Verify that maxi fuse 6 (30A) and maxi fuse 5 (30A) in the power distribution box are fully seated and intact.

- Verify that the system ground eyelet is firmly attached to the ground stud and is free of corrosion and excessive dirt.

- Are the connections secure and the fuses operational?

> Yes
If the ABS warning lamp comes on for three seconds and goes out (normal bulb prove out), Go to System Precheck 4. PC4

If the ABS warning lamp comes on and stays on (hard light), Go to System Precheck 3. PC3

> No
Go to System Precheck 5. PC5