Caster and Camber

1. Remove the alignment plate.
(1) Remove the upper suspension arm adjusting nuts.
(2) Remove the alignment plate.





2. Install the (A) cams and the (B) upper arm adjusting nuts.





3. To increase the caster on the LF, move the (A) front of the front suspension upper arm outboard and move the (B) rear of the front suspension upper arm inboard. To increase the camber LF and RF, move the (C) front suspension upper arm outboard equally.





4. To decrease the caster on the LF, move the (A) front of the front suspension upper arm inboard and move the (B) rear of the front suspension upper arm outboard. To decrease the camber LF and RF, move the (C) front suspension upper arm inboard equally.





5. Tighten the upper suspension arm nuts.





6. Decrease the caster on the RF.
(1) Loosen the caster set lock nuts.
(2) Adjust the caster set bolts forward.





7. To increase the caster on the RF.
(1) Loosen the caster set lock nuts.
(2) Adjust the caster set bolts rearward.





8. Tighten the upper suspension arm nuts.