Fuel Tank: Service and Repair

REMOVAL
1. Perform fuel pressure release, fuel draining procedures. Drain the fuel tank.
2. Remove the front fuel tank skid plate bolts.






3. Remove the rear LH bolt.






4. Remove the rear RH bolt and lower the fuel tank skid plate.






5. Use a suitable jack to support the fuel tank.






6. Remove the (A) fuel tank filler pipe and the (B) vent hose.







7. Remove the fuel tank support strap bolt and remove the fuel tank support strap.






8. Remove the fuel tank support bracket bolts and push the fuel tank back until the lip clears the support bracket.






9. Lower the fuel tank just enough to expose the fuel lines and the fuel tank transducer connector.
10. Disconnect the fuel lines.






11. Disconnect the fuel tank pressure transducer electrical connector and lower the fuel tank.

INSTALLATION






1. Connect the fuel tank pressure transducer electrical connector.
2. Connect the fuel lines.






3. Raise the fuel tank into position, slide it forward into the support bracket, and install the fuel tank support bracket bolts.






4. Position the fuel tank support strap and install the bolt.






5. Install the (A) fuel tank filler pipe and the (B) vent hose.






6. Remove the jack.






7. Position the fuel tank skid plate and install the front bolts.






8. Install the rear RH bolt.






9. Install the rear LH bolt. Tighten to specifications.