Impact Sensor: Service and Repair

REMOVAL






1. Remove the battery cables.
1 Remove the battery ground cable.
2 Remove the battery to starter relay cable and wait one minute for the backup power supply to be depleted.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

2. Remove the radiator grill and radiator opening cover.






3. Remove the air bag sensor.
1 Disconnect the air bag sensor electrical connector.
2 Remove the three screws.
3 Remove the air bag sensor.

INSTALLATION










1. To install, reverse the removal procedure.