Front Seat Support Assembly

REMOVAL
1. Disconnect the battery ground cable if removing a power assisted seat.
2. If removing the passenger front seat support assembly, remove the under seat storage drawer.
3. Remove the front seat.
4. Disconnect the shoulder belt retractor switch electrical connector under the seat.
5. Disconnect the safety belt warning switch electrical connector under the front seat support assembly.
6. If removing a power seat, disconnect the seat back control switch electrical connector under the front seat adjuster.
7. Remove the four front seat support assembly bolts. Use a box wrench and remove the inboard front seat support assembly.
8. Remove the front seat support assembly from the vehicle.

INSTALLATION
1. To install, reverse the removal procedure.
2. Tighten the front seat support assembly bolts to 32-54 Nm (24-40 Lb Ft).