Rear Roller Release Cams

NOTE: The roller release cams are a part of the rear seat back pivot and track adjuster and are not serviced separately.

REMOVAL
1. Remove the rear bench seat from the vehicle.







2. Remove the rear seat track adjusting handle, the rear seat back release latch, and the rear seat back pivot handle.
3. Remove the seat side trim.







4. Remove the two rear bench seat cushion bolts and remove the rear seat cushion cover and rear seat cushion pad as an assembly.







5. Remove the two rear seat back pivot and track adjuster bolts and the rear seat back latch cover from the inside right side of the rear seat cushion frame.







6. Remove the E-clip from the right roller release cam and detach the rear seat back latch cable and the slider mechanism arm.
7. Remove the roller release cam bracket bolts from the right side of the rear seat cushion frame.







8. Remove the E-clip and separate the right roller release cam from the right roller release cam bracket.







9. Remove the left roller release cam bracket bolts from the left side of the rear seat cushion frame.







10. Remove the E-clip from the inside of the left roller release cam and detach the rear seat back latch cable.
11. Remove the E-clip from the left roller release cam and left roller release cam bracket.







12. Detach the spring to separate the left roller release cam from the left roller release cam bracket.

INSTALLATION
1. To install, reverse the removal procedure.