Cylinder Block Assembly: Specifications

DIMENSIONS
Cylinder Block Distortion
Standard 0.03 mm (0.0012 inch)
Maximum 0.10 mm (0.0039 inch)
Cylinder Block Height 227.6-227.7 mm (8.9606-8.9645 inches)
Max. Combined Block/Head Resurfacing Limit 0.2 mm (0.008 inch)
Cylinder Bore
Grade No.1 87.000-87.010 mm (3.4252-3.4256 inches)
Grade No.2 87.010-87.020 mm (3.4256-3.4260 inches)
Grade No.3 87.020-87.030 mm (3.4260-3.4264 inches)
Wear Limit 0.20 mm (0.0079 inch)
Taper Limit Less than 0.015mm (0.0006 inch)
Out-of-Round Limit Less than 0.015mm (0.0006 inch)