Instrument Panel - Lower Cover

REMOVAL







1. Remove the four console compartment door plastic screws or C/D changer cover plastic screws and the console compartment door or the C/D changer cover.

NOTE: The removal and installation procedures are identical for the RH inner instrument panel lower cover and LH inner instrument panel lower cover.







2. Remove the two inner instrument panel lower cover screws and the plastic nut.
3. Remove the inner instrument panel lower cover and disconnect the foot lamp electrical connector.

INSTALLATION
1. To install, reverse the removal procedure.
2. Tighten the inner instrument panel lower cover screws to 2.6-3.6 Nm (23-32 Lb In).