Instrument Panel Illumination

Inspection and Verification
1. Verify customer concern by operating the instrument cluster and panel lighting system.
2. Visually inspect the following components of the instrument cluster and panel lighting system:
3. If fault is not visually evident, refer to the symptom chart. Instrument Cluster and Panel Lighting

VISUAL INSPECTION CHART

ELECTRICAL MECHANICAL
- Blown fuse: -Sticking or binding autolamp/
- 7.5A I/PILLUM light switch rheostat resistor
- 10A MIRROR
- Damaged wiring Harness
- Damaged autolamp/light switch rheostat resistor
- Damaged switches
- Damaged or loose lamps
- Damaged tail lamp relay
- Loose or corroded connections