Power Steering Oil Cooler Tube

REMOVAL
1. Place a drain pan under the power steering oil cooler tube connections.
2. Remove the front bumper.
3. Remove intermediate hose A.
4. Remove intermediate hose B.





5. Remove the left power steering oil cooler tube bolt.





6. Remove the center power steering oil cooler tube bolt.





7. Remove the lower right power steering oil cooler tube bolt.





8. Remove the upper right power steering oil cooler tube bolt.
9. Remove the power steering oil cooler tube from the vehicle.

INSTALLATION
1. To install, reverse the removal procedure.
^ Refer to Torque Specifications.

NOTE: Follow the start-up procedure. Start Up Procedure After Power Steering Pump or Gear Service