Idle Speed/Throttle Actuator - Electronic: Service and Repair

REMOVAL

1. Disconnect the Fast Idle Control (FIC) solenoid electrical connector.
2. Disconnect and plug the coolant hose from the IAC-FIC assembly.
3. Disconnect the Idle Air Control (IAC) solenoid electrical connector.
4. Remove the four Idle Air Control-Fast Idle Control (IAC-FIC) assembly bolts.
5. Remove the IAC-FIC assembly and gasket.
- Discard the gasket.

INSTALLATION

1. Install a new gasket on the IAC-FIC assembly and position the IAC-FIC assembly on the intake plenum.
2. Install the four IAC-FIC assembly bolts.
- Tighten the IAC-FIC assembly bolts to 7-8 Nm (61-71 in lb).
3. Connect the IAC solenoid electrical connector.
4. Remove the plug and connect the coolant hose to the IAC-FIC assembly.
5. Connect the FIC solenoid electrical connector.