Idle Up Control Valve: Service and Repair

REMOVAL

1. Disconnect the battery ground cable.





2. Disconnect the Fast Idle Control (FIC) solenoid electrical connector.
3. Remove the FIC solenoid from the IAC-FIC valve assembly.
4. Remove the copper washer from the FIC solenoid.
- Discard the copper washer.

INSTALLATION

1. Install a new copper washer on the FIC solenoid, then screw the FIC solenoid into the IAC-FIC assembly.
2. Connect the FIC solenoid electrical connector.
3. Connect the battery ground cable.