Test Notes

You should enter this pinpoint test only when directed here,

This pinpoint test is intended to diagnose:
- Spark plugs
- Ignition Cables

PRELIMINARY NOTES
The engine analyzer is used to diagnose problems in the secondary side of the ignition system.

CHECKOUT
- Visually inspect the engine compartment to ensure all vacuum hoses and ignition cables are properly routed and securely connected.
- Examine all wiring harnesses and connectors for damaged, burned or overheated insulation and loose or broken conditions.
- Be certain the battery is fully charged.
- All accessories should be OFF during diagnosis.

EQUIPMENT
Obtain the following test equipment or an equivalent:
- Engine Analyzer (010-00863).

NOTE: In order for the diagnostic procedures to provide accurate results, it is essential that the calibration of the engine analyzer be maintained. Refer to the equipment manual for the procedure to calibrate the engine analyzer.