Test Notes

You should enter this pinpoint test only when directed here.

Preliminary checks must be performed before entering this pinpoint test.

CHECK:
- Electrical connections
- Vacuum leaks
- Fuel level and quality
- Ignition wiring connections
- Air intake filters, tubes and gaskets
- Aftermarket alterations
- Basic engine (valves, timing, etc.)

DESCRIPTION
This pinpoint test contains instructions for isolating an intermittent fault. It combines the use of a scan tool with a breakout box, a fuel pressure gauge, vacuum gauge, and Digital Volt-Ohm Multimeter (DVOM). Actual values can be compared to typical values listed in the Diagnostic Reference Values to aid in finding the fault. Also refer to Intermittent Fault Diagnosis, for further help in isolating and repairing the fault.