Engine - Hard Start in Cold Temperatures/High Altitudes

Article No.
97-20-11

09/29/97

HARD START - COLD TEMPERATURES AND/OR HIGH ALTITUDES - VEHICLES BUILT THROUGH 9/1/97

LIGHT TRUCK:
1997 VILLAGER

ISSUE:
A hard start and/or no start condition may be present on some vehicles during cold ambient temperatures and/or high altitudes. This may be caused by a rich fuel mixture being delivered during cranking which may flood the engine.

ACTION:
Replace the Powertrain Control Module (PCM). The revised calibration provides a reduced amount of fuel during cranking to reduce the possibility of flooding. Refer to the 1997 Villager Service Manual for replacement procedures.





Obtain an Authorized Modification Decal (FPS 8262 - obtainable through DOES II, 25/pkg) and list the date, dealer number, and summary of modifications performed. Select a prominent place adjacent to the Vehicle Emission Control Information Decal suitable for installing the Authorized Modifications Decal. Clean the area, install the decal, and cover it with a clear plastic decal shield.

PART NUMBER PART NAME

F7XZ-12A650-CA Powertrain control
Module (PCM)

OTHER APPLICABLE ARTICLES: NONE

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION DESCRIPTION TIME

972011A Replace Powertrain Control 0.6 Hr.
Module (PCM)

DEALER CODING
CONDITION
BASIC PART NO. CODE
RECAL 42

OASIS CODES: 602300, 603300