A/C Cycling Switch

REMOVAL







1. Disconnect the A/C cycling switch electrical connector.

NOTE: The A/C cycling switch is located on top of the suction accumulator/drier. It is mounted on a Schrader valve, so the A/C cycling switch can be removed without discharging the A/C system.

2. Remove the A/C cycling switch from the suction accumulator/drier.
3. Inspect the A/C cycling switch for proper operation.

INSTALLATION
1. Install the A/C cycling switch on the suction accumulator/drier. Tighten the A/C cycling switch to 1.3-5.4 N.m (12-48 lb-in).
2. Connect the A/C cycling switch electrical connector.