Instrument Cluster - Lens

REMOVAL







1. Disconnect the battery ground cable.







2. Remove the center instrument panel finish panel.
1 Remove the rear wiper/washer switch knob.
2 Remove the screws.
3 Disconnect the connectors and remove the center instrument panel finish panel.







3. Remove the parking brake release handle.
1 Remove the screws.
2 Remove the parking brake release handle.







4. Remove the hood latch release handle.
1 Remove the screws.
2 Remove the hood latch release handle.







5. Remove the instrument panel steering column cover.
1 Remove the screws.
2 Remove the instrument panel steering column cover.







6. Remove the instrument panel steering column opening cover reinforcement.
1 Remove the four screws.
2 Remove the instrument panel steering column opening cover reinforcement.
7. If equipped, position the column gearshift lever aside.







8. Pull out the cluster finish panel.
1 Remove the screws.
2 Pull out the cluster finish panel.







9. Remove the cluster finish panel.
1 Disconnect the connectors.
2 Remove the cluster finish panel.







10. Remove the instrument cluster lens and mask assembly.
1 Remove the screws.
2 Remove the instrument cluster lens and mask assembly.

INSTALLATION






















1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.