Feeder Cable

REMOVAL
1. Remove the instrument cluster.
2. Disconnect the feeder cable from the electronic door lock control antenna.
3. Remove the four console compartment plastic screws or C/D changer cover plastic screws (if equipped) and the console compartment door or C/D changer cover.
4. Remove the two LH inner instrument panel lower cover screws and the plastic nut.
5. Remove the LH inner instrument panel lower cover and disconnect the foot lamp electrical connector.
6. Disconnect the feeder cable from the timer module.
7. Remove the feeder cable fastener from the instrument panel.
8. Remove the feeder cable from the vehicle.

INSTALLATION
1. To install, reverse the removal procedure.