Fore-and-Aft Adjustment

1. Place the roof glass panel in the open position.







2. Loosen the four cover rail screws and the six exterior roof sliding panel housing screws which fasten the cover rails to the roof sliding panel housing.
3. Move the cover rails forward or backward as necessary, making sure that both sides are uniform to the forward-and-backward adjustment marks.







4. Tighten the RH and LH cover rail screws to 3-5 N.m (27-44 Lb-In). Tighten the exterior roof sliding panel housing screws to 3-5 N.m (27-44 Lb-In).

CAUTION: Hand-tighten all screws. Do not use air tools or damage to the holes in the roof sliding panel housing may occur.