Cable, Rear Seat Back Pivot

REMOVAL
1. Remove the rear bench seat from the vehicle.







2. Remove the rear seat track adjusting handle and the rear seat back pivot handle.
3. Remove the rear seat trim.







4. Remove the two rear seat cushion bolts and remove the rear seat cushion cover and rear seat cushion pad as an assembly.







5. Remove the two rear seat back pivot and track adjuster bolts and the rear seat back latch cover from the inside right side of the rear seat cushion frame.







6. Remove the E-clip from the right roller release cam and detach the rear seat back latch cable.







7. Remove the left roller release cam bracket bolts from the left side of the rear seat cushion frame.







8. Remove the E-clip on the inside of the left roller release cam and detach the rear seat back latch cable.
9. Remove the rear seat back latch cable end bracket bolt from each side of the rear seat cushion frame.
10. Remove the four rear seat back latch cable bracket screws from the rear seat cushion frame.
11. Remove the rear seat back latch cable from the rear seat cushion frame.

INSTALLATION
1. To install, reverse the removal procedure.
2. Refer to the rear seat track adjusting handle effort adjustment procedure.