Front

REMOVAL
1. Remove the under seat storage drawer if repairing the passenger seat.







2. Move the front seat fully forward.

NOTE: The front seat and front seat track assembly is removed separately from the front seat support assembly.

3. Remove the two rear front seat track-to-front seat support assembly bolts.
4. Move the front seat fully rearward.
5. Disconnect the battery ground cable if removing a power assisted seat.
6. Remove the two front seat track-to-front seat support assembly bolts.







7. If removing the driver front seat, disconnect the seat regulator control switch electrical connector, the lumbar support switch electrical connector and the safety belt warning switch electrical connector if equipped.







8. If removing the passenger front seat, disconnect the seat regulator control switch electrical connector if equipped.
9. Remove the front seat and front seat track assembly from the vehicle.

INSTALLATION
1. Position the front seat and front seat track assembly on the front seat support assembly in the vehicle.
2. Install the two front seat track-to-front seat support assembly bolts beginning with the outboard bolt.
3. If installing a power seat, connect the seat back control switch electrical connector under the front seat adjuster, and connect the battery ground cable.
4. Move the front seat fully forward.
5. Install the two rear front seat track-to-front seat support assembly bolts beginning with the outboard bolt.
6. Tighten the front seat track-to-front seat support assembly bolts to 18-31 N.m (14-23 Lb-Ft).
7. Install the under seat storage drawer if necessary.