Center and Rear

NOTE: This procedure applies to the center bucket seats, center bench seat, and the rear bench seat.







REMOVAL
1. Remove the seat from the vehicle.
2. Remove the seat trim from the side of the seat.
3. Remove the seat back arm rest pads.
4. Unfasten the seat back cover and expose the rear seat back recliner-to-seat back bolts.
5. Remove the two rear seat back recliner-to-seat back bolts.
6. Remove the three rear seat back recliner-to-seat cushion frame bolts.
7. Remove the rear seat back recliner from the seat.







INSTALLATION
1. To install, reverse the removal procedure.

NOTE: Be sure to insert the pivot pin into the locating sleeve in the seat cushion frame.

2. Tighten the two rear seat back pivot-to-seat back bolts to 127 N.m (94 Lb-Ft).
3. Tighten the three rear seat back pivot-to-seat cushion frame bolts to 127 N.m (94 Lb-Ft).