Switch Tests

Connector Shown From Component Side:

SEAT REGULATOR CONTROL
1. Remove the RH seat regulator control switch.
2. Measure the resistance between the terminals on the RH seat regulator control switch as indicated.
3. If the resistances are not as specified, replace the RH seat regulator control switch. Otherwise, return to the pinpoint tests.

Connector Shown From Component Side:

SEAT BACK CONTROL SWITCH
1. Remove the LH seat back control switch.
2. Measure the resistance between the terminals on the LH seat back control switch as indicated.
3. If the resistances are not as specified, replace the LH seat control switch. Otherwise, return to the pinpoint tests.