Blend Door

AUXILIARY A/C HEATER TEMPERATURE BLEND AND/OR VENT DOOR

REMOVAL
1. Remove the rear air conditioning and heating assembly.
2. Remove the rear temperature blend door actuator motor and rear vent door actuator motor.
3. Remove the three lower duct screws and the lower duct from the rear air conditioning and heating assembly.
4. Remove the one duct screw and the heater unit duct.
5. Remove the 25 rear air conditioning and heating assembly case screws and separate the rear air conditioning and heating assembly case.
6. Remove the rear temperature blend and/or rear vent door from the rear air conditioning and heating assembly case.

INSTALLATION
1. To install, reverse the removal procedure.