Quick Test 1.0 - Visual Inspection

Perform the Visual Check and Vehicle Preparation procedures as outlined in Powertrain Management.

Inspect the following:
- Air cleaner and inlet ducts.
- All engine vacuum hoses for damage such as leaks, cracks, blockage, proper routing, etc.
- PCM system wiring harnesses for proper connections, bent or broken pins, corrosion, loose wires, proper routing, etc.
- PCM, sensors and actuators for physical damage.
- Engine coolant for proper level.
- Transaxle fluid for proper level and condition.
- Any non-factory installed items wired into the transaxle or PCM harnesses.

Perform all necessary repairs before continuing with Quick Tests.