Quick Test 2.0 - Set Up

Connect the New Generation STAR (NGS) Tester 418-FO48 (007-00500) or equivalent to Data Link Connector (DLC).

Vehicle And Tester Preparation
Prepare to run OBD 11 procedures.
- Gearshift lever in Park (P).
- Engine at operating temperature.
- Apply parking brake.
- Block wheels.
- Turn ignition switch to the OFF position.
- Verify that the proper program card is inserted in the NGS.
- Connect J1962/16 way DCL cable adapter to the NGS.
- Connect NGS DCL cable adapter securely into the vehicle's data link connector.
- Turn the ignition switch to the ON position or start vehicle if necessary.

NOTE: If the NGS does not communicate with the PCM, refer to the Powertrain Management.

The NGS is ready to communicate with the PCM.