Keyless Entry Module: Service and Repair

CAUTION: Electronic module are sensitive to static electrical charges. If exposed to these charges, damage may result.

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the four console compartment plastic screws or C/D changer cover plastic screws (if equipped) and the console compartment door or C/D changer cover.







3. Remove the two LH inner instrument panel lower cover screws and the plastic nut.
4. Remove LH inner instrument panel lower cover and the disconnect the foot lamp electrical connector.







5. Remove the three timer module screws.
6. Disconnect the timer module electrical connector.
7. Remove the timer module from the vehicle.

INSTALLATION
1. To install, reverse the removal procedure.