Autolamp/Light Switch Rheostat Resistor Assembly

REMOVAL
1. Disconnect the battery ground cable.
2. Pull the headlamp switch/autolamp/light switch rheostat resistor assembly from the instrument panel finish panel.







3. Disconnect the autolamp/light switch rheostat resistor assembly electrical connector.
4. Disconnect the headlamp switch electrical connector.







5. Remove the two autolamp/light switch rheostat resistor assembly screws. Remove the autolamp/light switch rheostat resistor assembly from the headlamp switch/autolamp/light switch rheostat resistor assembly.

INSTALLATION
1. To install, reverse the removal procedure.