Body Side Glass

1. Remove the LH quarter latch pillar upper finish panel.







2. Loosen the two body side glass hinge nuts.
3. Remove the rear quarter window garnish moulding.







4. Loosen the two body side glass latch bolts.
5. Adjust the body side glass.
6. While holding the body side glass, have an assistant tighten the two body side glass hinge nuts to 3.8-4.5 N.m (34-40 Lb-In).
7. Tighten the body side glass latch bolts to 3.8-4.5 N.m (34-40 Lb-In).
8. Install the rear quarter window garnish moulding.
9. Install the LH quarter latch pillar upper finish panel.