Opening

REMOVAL
1. Disconnect the battery ground cable.
2. Raise the back window glass.







3. Disconnect the two heated back window electrical connectors.







4. Use a screwdriver to pry the clips from both opening back window glass supports.

CAUTION: An assistant may be necessary to support the opening back window glass while removing the liftgate glass-to-hinge screws and back window glass supports.







5. Pull the opening back window glass supports from the opening back window glass.







6. Remove the four back window glass-to-hinge screws.
7. Remove the opening back window glass from the liftgate.

INSTALLATION
1. To install, reverse the removal procedure.

Tighten the back window glass-to-hinge screws to 3.8-4.5 N.m (34-40 Lb-In).

2. Adjust the opening back window glass.