Removal and Replacement

REMOVAL
1. Remove the quarter window garnish moulding.







2. Open the rear quarter window glass. Remove the rear quarter window latch-to-glass screw.







3. Support the rear quarter window glass and remove the two rear quarter window glass hinge nuts.

CAUTION: Support the rear quarter window glass before removing the two rear quarter window glass hinge nuts. If the rear quarter window glass is not supported it may fall and break or cause damage to the vehicle.

4. Remove the rear quarter window glass.

INSTALLATION
1. To install, reverse the removal procedure. Adjust the rear quarter window glass.
2. Tighten the two rear quarter window glass hinge nuts to 3.8-4.5 N.m (34-40 Lb-In).
3. Tighten the rear quarter window latch-to-glass screw to 3.8-4.5 N.m (34-40 Lb-In).