Auxiliary Control - Rear Integrated Control Panel

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the console compartment trim pane] screws.







3. Remove the console compartment door hinge screw.







4. Remove the console rear panel screws at the top of the panel.







5. Remove the console rear panel screws at the cupholder.







6. Remove the rear integrated control panel screws.







7. Disconnect the floor/panel control arm at the control head.







8. Disconnect the rear blower motor control and rear radio controls electrical connectors.

INSTALLATION



























1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.