S: LFC 43/DTC B2440 - Pass Side Crash Sensor Mounting Failure

Normal Operation
The passenger side crash sensor monitors the severity of a crash event. If the crash event is severe enough, the sensor will signal the Restraints Control Module (RCM) to deploy the passenger side air bag.

The RCM monitors the two-wire current loop to the passenger side crash sensor for a signal that is out of the expected range. If the RCM detects a signal from the passenger side crash sensor, indicating a sensor mounting failure, it will store Diagnostic Trouble Code (DTC) B2440 and flash a Lamp Fault Code (LFC) 43 (or a higher priority code if one exists) on the air bag indicator.

Possible Causes
A passenger side crash sensor mounting failure fault can be caused by:
- damaged passenger side crash sensor.
- corrosion or damage at the sensor mounting surface.

Pinpoint Test Steps:

S1 - S2:

S3 - S6: