Front

Removal
1. Raise and support the vehicle.





2. Disconnect the front anti-lock brake sensor wire from the vehicle frame.
1 Disconnect the electrical connector.
2 Unclip the front anti-lock brake sensor wire from the vehicle frame.





3. Remove the front anti-lock brake sensor.
1 Remove the bolt.
2 Remove the front anti-lock brake sensor.


Installation





1. NOTE: Plug the sensor mount opening and thoroughly clean the mounting surface. Apply High Temperature 4x4 Front Axle and Wheel Bearing Grease E81Z-19590-A meeting Ford specification ESA-M1C198-A.

To install, reverse the removal procedure.