C-Pillar

Safety Belt Bolt Bit:

Special Tool(s)

REMOVAL

WARNING: All seat belt assemblies including retractors, buckles, front seat belt buckle support assemblies (slide bar), shoulder belt height adjusters (if so equipped) child safety seat tether attachments and attaching hardware should be inspected after any collision. All belt assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate properly. Belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted.

1. Remove the quarter trim panel.







2. Remove the seat belt retractor.
1 Use Safety Belt Bolt Bit to remove the bolt.
2 Remove the seat belt retractor.

INSTALLATION







1. Use Safety Belt Bolt Bit to install the seat belt retractor.
2. Install the quarter trim panel.
3. Check the restraint system for proper operation.