Alternator: Service and Repair

REMOVAL
1. Disconnect the battery.
2. Remove the air cleaner outlet tube.
3. Remove the drive belt.







4. Disconnect the wiring harness to voltage regulator electrical connector.







5. Remove the B+ terminal cover.







6. Remove the B+ terminal electrical connector.
1 Remove the B+ terminal nut.
2 Disconnect the B+ terminal electrical connector.







7. Position the A/C manifold and tube bracket aside.
1 Remove the nut.
2 Position the A/C manifold and tube bracket aside.







8. Remove the wiring harness to-generator pin-type retainer.







9. Remove the Generator (GEN).
1 Remove the stud bolt.
2 Remove the bolts.
3 Remove the generator.





INSTALLATION



















1. To install, reverse the removal procedure.