Rear Door Window Motor

REMOVAL
1. Raise and support the rear door window glass to the full up position.
2. Disconnect the battery ground cable.
3. Remove the rear door trim panel.







4. Remove the speaker.
1. Remove the screws.
2. Disconnect the electrical connector.
3. Remove the speaker.







5. Remove the watershield.







6. Remove the power window motor.
1. Remove the bolts.
2. Disconnect the electrical connector.
3. Remove the power window motor.

INSTALLATION







1. To install, reverse the removal procedure.
- Cycle the door glass to ensure engagement of the drive mechanism.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.