Mirrors: Description and Operation

The rear view mirror systems consists of the following components:
^ exterior rear view mirror
^ interior rear view mirror
^ power mirror adjust switch

PRINCIPLES OF OPERATION

Driver Seat Module
The power driver seat and power exterior rear view mirrors are controlled by the Driver Seat Module (DSM) only when the vehicle is equipped with programmable/recall memory option.

Memory Exterior Rear View Mirrors
The memory exterior rear view mirrors feature allows the driver to program personalized mirror positions that can be recalled using the memory switches or remote transmitter. There are three memory positions possible. The driver must move the mirror to the desired position using the power mirror switch. The driver must then depress the memory SET switch, which activates the memory SET switch Light Emitting Diode (LED). Within five seconds (before the LED goes out), the driver must select a memory switch position. If no memory switch input is received within the five-second time limit, the operation is aborted and the memory SET switch LED will turn off. If the power driver seat switch, power mirror adjust switch or memory SET switch is depressed during the five-second programming limit, the operation is aborted and the memory SET switch LED is turned off.

NOTE: A memory recall cannot be initiated if the vehicle is in PARK or NEUTRAL with the ignition switch in the RUN position.