Cylinder Head Assembly
| Cylinder Head Surface Distortion | Standard | Less than 0.0012 | |
| limit | 0.004 | ||
| Cylinder Head Height | 4.205-4.220 | ||
| Valve Head Diameter | Intake | 1.654-1.661 | |
| Exhaust | 1.378-1.386 | ||
| Cylinder Head Valve Guide Hole Diameter | Intake | Standard | 0.4321-0.4329 |
| Limit | 0.4400-0.4408 | ||
| Exhaust | Standard | 0.4715-0.4723 | |
| Limit | 0.4793-0.4802 | ||
| Cylinder Head Bolts The cylinder head bolt washers must be installed with the chamfered edge facing away from the cylinder head surface. | Stage 1 | 21 | |
| Stage 2 | 44 | ||
| Stage 3 | Loosen Bolts Completely | ||
| Stage 4 | 89 |