Inspection and Verification (Start Testing Here)

1. Verify the customer concern by operating the system.
2. Visually inspect for obvious signs of mechanical or electrical damage.

VISUAL INSPECTION CHART

Mechanical
^ Damaged headlamp switch
^ Damaged autolamp time delay switch (part of headlamp switch)
^ Damaged LCM
^ Damaged, covered or obstructed autolamp sensor

Electrical
^ Blown fuse(s):
- BJB F35 (10 A)
- BJB F38 (7.5 A)
^ Damaged wiring harness
^ Loose or corroded connections
^ Blown headlamp bulb
^ Damaged LCM

3. If the concern is not visually evident, determine the symptom and proceed to Symptom Chart. Symptom Chart(s)