Lamp Control Module: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the console cover.
1 Remove the four pin-type retainers.
2 Remove the console cover.







3. Remove the Lighting Control Module (LCM).
1 Disconnect the electrical connector.
2 Remove the bolt.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.