Solid Rear Axle

Rear Suspension Components

Anti-Windup Bar (5.0L Only)
The anti-windup bar compensates for rotational torque placed on the rear axle during acceleration and braking by preventing the rear axle and rear spring from twisting (winding up).
The anti-windup bar minimizes noise and vibration issues caused by excessive pinion-to-driveshaft angles during acceleration and braking.

Rear Axle Bumpers
The rear axle bumpers are used to prevent metal-to-metal contact between the rear axle and the frame.

Rear Spring
Semi-elliptic, leaf-type rear springs are used for the rear suspension.

Shock Absorbers
The shock absorbers provide the necessary suspension dampening control.

Stabilizer Bar
The rear stabilizer bar transmits forces to control vehicle roll during, cornering.

Suspension Fasteners
New fasteners must be installed if the old fasteners are loosened or removed. They must be installed new with the same part number or an equivalent part if installation is necessary. Do not use a replacement part of lesser quality or substitute design. The specified torque value must be used during assembly to ensure correct part retention.

Load Leveling
The load leveling system adjusts the suspension to accommodate quickly changing road conditions. The load leveling system is available on 4x4 vehicles.