Operation CHARM: Car repair manuals for everyone.

Warning Devices






NOTE: The Generic Electronic Module/Central Timer Module (GEM/CTM) is connected to the ISO link and is diagnosed through the Data Link Connector (DLC) with a scan tool.

There are five warning chimes and lamps the GEM/GYM controls: head lamps operating without the ignition on (chime only), door ajar (chime and lamp), key-in-ignition (chime only), driver seat belt warning (chime and lamp), and message center.







Audible Warnings

When the ignition switch is turned to RUN or START from OFF or ACC, the chime will sound for six seconds or until the safety belt is buckled.

The safety belt warning indicator lamp will turn on for 60 seconds or until the driver safety belt is fastened. Both the chime and the lamp turn on at the same time.

If the safety belt is buckled before the ignition switch is turned to RUN or START, from OFF or ACC, neither the chime nor lamp will be activated.

Anytime the ignition switch is changed to RUN from START while the safety belt warning indicator is activated, the safety belt warning indicator will remain activated until either the timing sequence has been executed or the safety belt is buckled.

When at least one door is ajar and the key is in the RUN position, the door ajar cluster lamp is activated and remains on until all doors are closed. A warning tone will sound once any time the key is in the ignition switch and any door is open.

The key-in-ignition warning will sound when the driver side front door is opened with the key in the ignition switch and the ignition switch in OFF or ACC. It will continue to sound until the key is removed, the front door is closed, or the ignition switch is in RUN or START.

The headlamp-on reminder chime will be activated if the headlamps or parking lamps are on, the key is not in the ignition switch, and the driver door is opened.

A single tone will be provided each time a ground signal is received from the message center. A one-second tone will sound for warning indications from the message center. A 100 milli-second tone will sound for each message center button depressed.